What Are The Reasons And Characteristics Of Timepiece Manufacturers Using Double Barrels?

發布 9 月 前 在 经济贸易. 83 浏览

Design custom watches from manufacturer www.watches5.com. We not only manufacture the whole watch, but also the watch parts, especially for the watch dials, watch cases, watch bands and more watches related accessories.

What Are The Reasons And Characteristics Of Timepiece Manufacturers Using Double Barrels?

A standard size barrel has determined the characteristics of the spring and does not allow for an arbitrary increase in the length of the spring. Because best Watches Manufacturers find that the most effective value for power output is that the spring takes up 55% to 60% of the barrel, and when it transmits power through the gear set, the moving power is consumed over a long pass.

When the rotational torque of the barrel is lower than a certain value, it will stop running due to the frictional force. This requires the spring spring to have high efficiency, long service life, and the change of the rotational torque can be kept to a minimum during start-up. In addition, the maximum kinetic energy can be stored in the smallest space, so the watch and clock developers have been committed to extending the power reserve time for continuous operation of the watch.

Oldest Watch Manufacturer

Simply put, a long-term energy reserve is achieved by lengthening the length of the spring or increasing the strength of the spring. However, due to the limited space inside the movement, it is no longer possible to increase the number of windings of the spring, and the physical limit is quickly reached. Therefore, it is possible to indirectly extend the length of the spring by using a plurality of barrel structures in series in the movement. Make the watch take longer.

For example, two barrels in Lange's 31-day-long power watch movement are arranged one above the other and connected in series to achieve a dynamic superposition effect, doubling the movement's continuous running time. The springs in the two barrels of the movement are extremely long, both about 1.85 meters.

Watch Vendor

Although the addition of the lower strip in the movement requires more space, and means that more parts are needed, the complexity and sensitivity of the watch are increased, the swing chain is separated, and the drive is driven by a small spring shaped like a hairspring. The chain is reconnected so that it can drive the escapement governor with a near constant output torque during the first 31 days of the full string to the full release of the spring.

This is why the Watches Factory uses double barrel.